Volkswagen Camper, Unleaded Conversion, More Power, Smoother Running Engine.

£49.95

IMPROVING ENGINE EFFICIENCY SINCE 1988

FUEL CAT DIESEL/PETROL FUEL ENHANCEMENT SYSTEM

THE ANSWER TO.

NO MORE   ADDITIVES.

                      NO MORE   OCTANE/CETANE BOOSTERS.

                              NO MORE   EXPENSIVE PREMIUM FUELS

     NO MORE   CARBON BUILDUP.

                 NO MORE   HIGH EMISSIONS/SMOKE.

                                 NO MORE   STALE or FUEL GUMMING. (inj only)

                        NO MORE   LEADED FUEL or 5 STAR FUEL.

FEEL THE DIFFERENCE OR YOUR MONEY BACK.

WORKS WITH ALL

Petrol, Diesel, Oil & Bio fuelled Engines

THE GREENEST SOLUTION TO SAVING FUEL,

 LOWERING EMISSIONS & LEADED to UNLEADED CONVERSIONS.

Unit may be used with any CAR up to 3500cc

Stops fuel deteriorating/gumming in your fuel system, 

during winter storage. (Inj only)

In todays stop/start driving conditions, 

engines build up carbon deposits very quickly due to incomplete burning of the fuel. 

The in-line unit dissolves excess carbon, 

so the engine runs more efficiently and oil stays cleaner for longer.

No need to use additives or more expensive PREMIUM unleaded.

All units sent registered mail, so it can be tracked.

SAVING FUEL and LOWERING EMISSIONS SINCE 1988.

What is Fuel Cat?


FUEL CAT is a catalyst that acts like a permanent octane booster, a combustion enhancer and combustion chamber carbon deposits cleaner. When the fuel flows through FUEL CAT fuel catalyst, a chemical reaction instantly takes place. The shape, temperature and speed of the burn are transformed, making combustion more complete and even, contributing to greater engine efficiency.    FUEL CAT fuel catalyst aids the combustion process by ensuring that fuel is highly uniform, potent, consistent and stable. Just one FUEL CAT is all you need. It is effective for up to 400,000km.
FUEL CAT removes and further prevents the build up of carbons, gums and waxes. Internally, your engine will be far cleaner and more efficient. It is particularly effective for injector needles, nozzles, valves, piston rings and oil contamination. After the first 2,000km of using FUEL CAT, the oil in your engine can become particularly dirty as it removes carbon deposits from the engine. All you have to do is change the engine oil, and thereafter it should stay noticeably cleaner for a longer period. By keeping your engine clean, FUEL CAT optimizes compression and seals the combustion chambers from the crank case, preventing contamination of the engine oil.

How does FUEL CAT achieve Fuel economy?

The FUEL CAT fuel catalyst induces chemical reactions among fuel molecules at low temperatures (such as those our vehicles and fuel tanks experience) and it returns them to their original state at the conclusion of the reaction ready to initiate a new sequence.
Fuel molecules have a tendency to cluster together. At the point of combustion, the outer molecules protect the inner molecules from being covered with oxygen, resulting in some of the inner molecules going un-burned and blowing out from the exhaust as emissions.
When fuel is passed through the FUEL CAT fuel catalyst just prior to combustion, a reaction occurs which separates the clustered molecules so more of the fuel molecules surface area is exposed to oxygen at the time of combustion.
A comparison would be if you put a piece of charcoal in a furnace for 30 seconds. The result: the oxygen only surrounds the outside of the charcoal only allowing the outside of the charcoal to burn. The oxygen does not reach the core of the charcoal as it was protected by the outer layer. If you  crushed the similar-sized charcoal into a powder, spread it out and place it into a furnace for 30 seconds, more of the surface of the charcoal would be exposed to the oxygen and a larger percentage of the charcoal would be burned.
This is what happens as the fuel passes through the FUEL CAT fuel catalyst. Clustered fuel molecules are separated so more oxygen can cover a larger surface area of the fuel molecules at the point of combustion.
The more fuel burned, the more energy created and less un-burned fuel will be emitted out from exhaust in turn reducing pollution.
A more efficient burn results in less fuel required to make horsepower. A cleaner burn means better oil chemistry and cleaner engine parts resulting in reduced maintenance.

How does Fuel Cat keep your engine cleaner?

Fuel Cat not only optimizes burning of fuel, but also keeps the engine clean by leaving no unburned fuel that can then turn into carbon monoxide, unburned hydrocarbon and free carbon (as soot) emerge from the combustion process. The unburned hydrocarbons and free carbon form gum or wax, and are loosely described as carbon deposits, which are baked hard, in the combustion chambers, onto piston crowns, valve heads (particularly the exhaust valve) spark plugs and interior surface of the combustion chambers. The piston ring can also be seriously affected and eventually become stuck in their grooves.
Fuel Cat regulates the speed and temperature of combustion which prevents micro welding between valve and valve seats; thus preventing valve seat recession.

       Benefits of Fuel Cat Pre Combustion Fuel Catalyst

1)    Better fuel economy. Saving between 8-16% on average

2)    Low octane gasoline performs like premium.
3)    Improve greater engine output (Torque & Horsepower).
4)    Easier starts.
5)    Remove and prevent carbon build up in the engine, due to its carbon cleaning properties.
6)    Prolong engine life.
7)    Reduced emissions of harmful gases.
8)    Less engine and fuel system maintenance.
9)    Increases the lifespan of your catalytic converter of your exhaust system.
10)   Reduce pinging due to engine burning on lean mixture of fuel and air.
11)   Suppresses bacterial growth in gasoline, thus fuel stays stable and fresh during storage.

12)  Noticeably fewer flat spots when used with M/Cycles, Scooters.

13   Helps leaded fuel engines to run on unleaded, without timing adjustments.

IMPROVING ENGINE EFFICIENCY SINCE 1988

FUEL CAT DIESEL/PETROL FUEL ENHANCEMENT SYSTEM

THE ANSWER TO.

NO MORE   ADDITIVES.

                      NO MORE   OCTANE/CETANE BOOSTERS.

                              NO MORE   EXPENSIVE PREMIUM FUELS

     NO MORE   CARBON BUILDUP.

                 NO MORE   HIGH EMISSIONS/SMOKE.

                                 NO MORE   STALE or FUEL GUMMING. (inj only)

                        NO MORE   LEADED FUEL or 5 STAR FUEL.

FEEL THE DIFFERENCE OR YOUR MONEY BACK.

WORKS WITH ALL

Petrol, Diesel, Oil & Bio fuelled Engines

THE GREENEST SOLUTION TO SAVING FUEL,

 LOWERING EMISSIONS & LEADED to UNLEADED CONVERSIONS.

Unit may be used with any CAR up to 3500cc

Stops fuel deteriorating/gumming in your fuel system, 

during winter storage. (Inj only)

In todays stop/start driving conditions, 

engines build up carbon deposits very quickly due to incomplete burning of the fuel. 

The in-line unit dissolves excess carbon, 

so the engine runs more efficiently and oil stays cleaner for longer.

No need to use additives or more expensive PREMIUM unleaded.

All units sent registered mail, so it can be tracked.

SAVING FUEL and LOWERING EMISSIONS SINCE 1988.

What is Fuel Cat?


FUEL CAT is a catalyst that acts like a permanent octane booster, a combustion enhancer and combustion chamber carbon deposits cleaner. When the fuel flows through FUEL CAT fuel catalyst, a chemical reaction instantly takes place. The shape, temperature and speed of the burn are transformed, making combustion more complete and even, contributing to greater engine efficiency.    FUEL CAT fuel catalyst aids the combustion process by ensuring that fuel is highly uniform, potent, consistent and stable. Just one FUEL CAT is all you need. It is effective for up to 400,000km.
FUEL CAT removes and further prevents the build up of carbons, gums and waxes. Internally, your engine will be far cleaner and more efficient. It is particularly effective for injector needles, nozzles, valves, piston rings and oil contamination. After the first 2,000km of using FUEL CAT, the oil in your engine can become particularly dirty as it removes carbon deposits from the engine. All you have to do is change the engine oil, and thereafter it should stay noticeably cleaner for a longer period. By keeping your engine clean, FUEL CAT optimizes compression and seals the combustion chambers from the crank case, preventing contamination of the engine oil.

How does FUEL CAT achieve Fuel economy?

The FUEL CAT fuel catalyst induces chemical reactions among fuel molecules at low temperatures (such as those our vehicles and fuel tanks experience) and it returns them to their original state at the conclusion of the reaction ready to initiate a new sequence.
Fuel molecules have a tendency to cluster together. At the point of combustion, the outer molecules protect the inner molecules from being covered with oxygen, resulting in some of the inner molecules going un-burned and blowing out from the exhaust as emissions.
When fuel is passed through the FUEL CAT fuel catalyst just prior to combustion, a reaction occurs which separates the clustered molecules so more of the fuel molecules surface area is exposed to oxygen at the time of combustion.
A comparison would be if you put a piece of charcoal in a furnace for 30 seconds. The result: the oxygen only surrounds the outside of the charcoal only allowing the outside of the charcoal to burn. The oxygen does not reach the core of the charcoal as it was protected by the outer layer. If you  crushed the similar-sized charcoal into a powder, spread it out and place it into a furnace for 30 seconds, more of the surface of the charcoal would be exposed to the oxygen and a larger percentage of the charcoal would be burned.
This is what happens as the fuel passes through the FUEL CAT fuel catalyst. Clustered fuel molecules are separated so more oxygen can cover a larger surface area of the fuel molecules at the point of combustion.
The more fuel burned, the more energy created and less un-burned fuel will be emitted out from exhaust in turn reducing pollution.
A more efficient burn results in less fuel required to make horsepower. A cleaner burn means better oil chemistry and cleaner engine parts resulting in reduced maintenance.

How does Fuel Cat keep your engine cleaner?

Fuel Cat not only optimizes burning of fuel, but also keeps the engine clean by leaving no unburned fuel that can then turn into carbon monoxide, unburned hydrocarbon and free carbon (as soot) emerge from the combustion process. The unburned hydrocarbons and free carbon form gum or wax, and are loosely described as carbon deposits, which are baked hard, in the combustion chambers, onto piston crowns, valve heads (particularly the exhaust valve) spark plugs and interior surface of the combustion chambers. The piston ring can also be seriously affected and eventually become stuck in their grooves.
Fuel Cat regulates the speed and temperature of combustion which prevents micro welding between valve and valve seats; thus preventing valve seat recession.

       Benefits of Fuel Cat Pre Combustion Fuel Catalyst

1)    Better fuel economy. Saving between 8-16% on average

2)    Low octane gasoline performs like premium.
3)    Improve greater engine output (Torque & Horsepower).
4)    Easier starts.
5)    Remove and prevent carbon build up in the engine, due to its carbon cleaning properties.
6)    Prolong engine life.
7)    Reduced emissions of harmful gases.
8)    Less engine and fuel system maintenance.
9)    Increases the lifespan of your catalytic converter of your exhaust system.
10)   Reduce pinging due to engine burning on lean mixture of fuel and air.
11)   Suppresses bacterial growth in gasoline, thus fuel stays stable and fresh during storage.

12)  Noticeably fewer flat spots when used with M/Cycles, Scooters.

13   Helps leaded fuel engines to run on unleaded, without timing adjustments.

SKU: 310992724033

Upgrade for improved performance and stronger spark.

Our 10mm High Energy Formula Power Race Quality

Leads are individually made to measure for your car, so no need to cut leads to size.

  • Extreme insulation property-well in excess of 50KV
  • Very low resistance, which gives excellent spark quality.
  • The centre is kevlar, wound by stainless steel, 70 windings per millimetre
  • , and will carry up to 90,000 volts with an engine compartment temperature of up to 400°C
  • EPDM silicone inner insulation.
  • High temp silicone plug boots with grip ribs.
  • Oil, Ozone,fuel and heat resistant.
  • Specific OHM resistance for hotter spark at plug.

Please contact us for prices.

IF YOU DO NOT SEE THE SET YOU WANT,

PLEASE SEND US DETAIL OF THE MAKE, MODEL,

YEAR ETC. CUSTOMISED ENGINES A SPECIALITY.

If handled carefully, your new HIGH ENERGY Formula Power leads, should last for years. Only fit new leads when engine is cold.

  • Replace leads one by one.
  • When pushing in the ends, please make sure they are at the right angle and pushed in securely. You should hear a click and feel firm.
  • When removing leads, do not pull them out hold holding the cable. Hold the boot and give them a slight twist first before pulling them out.
  • Removing cables is best done when leads are cool, rather than hot.
  • To check cables are fitted properly, run the car a few miles and then re check, in case any boots have come loose from not being connected properly.
  • Please make sure that around the spark plug area is clean from oil etc, before fitting.
  • When the cable is warm, you can usually fit them into clips, otherwise we sell cable spacers.

Will usually dispatch within 3 working days of receiving cleared payment. I must receive cleared payment within 3 days of the auction finishing; otherwise I will report to E-bay and leave negative feedback accordingly.

I always keep proof of posting receipts so if your item gets lost in the post i will send you this receipt so you can claim from the royal mail directly. I will back you up in such a claim and if for any reason you are not 100% happy with your purchase please just contact me and i will be more than happy to sort your problems out thank you

CANCELLATION AND RETURNS (taken from our Conditions of Use)

8.1 The Buyer may cancel the order for any reason up to the point of dispatch and any payments made by the Buyer shall be refunded in full within 28 days. In addition, if you are not satisfied with your new Formula Power HT leads, they can be returned within 30 days for a full refund.

8.2 The Buyer shall inspect the Goods immediately upon receipt and shall notify the Seller via email at websales@formulapower.com within 7 days if the Goods are damaged or do not comply with any of the Contract. If the Buyer fails to do so the Buyer shall be deemed to have accepted the Goods.

8.3 Where a claim of defect or damage is made, the Goods shall be returned by the Buyer to the Seller within 28 days of delivery. The Buyer shall be entitled to a replacement or a full refund (including delivery costs) plus any return postal charges if the Goods are in fact defective.

8.4 If you are a consumer you have the right, in addition to your other rights, to cancel the Contract and receive a refund by informing the Seller via email at websales@formulapower.com within 7 working days of receipt of the Goods.

8.5 Goods must be returned by the Buyer at the Buyer’s expense within 28 days of cancellation in the original packaging and should be adequately insured during the return journey. The Buyer will receive a refund of all monies paid for the Goods (including delivery charges, if any) except for return postal charges. If the Buyer fails to return the Goods following cancellation, the Seller shall be entitled to deduct the cost of recovering the Goods from the Buyer.

8.6 Goods to be returned must clearly show the order number obtained from the Seller on the package.

8.7 Where returned Goods are found to be damaged due to the Buyer’s fault the Buyer will be liable for the cost of remedying such damage.

8.8 Subject to any specific warranties we offer in relation to particular products, or those which are implied by law, we do not offer any warranty or guarantee on our products.

8.9 Our ignition leads are guaranteed for 10 years, as long as no fault can be attributed to customers mishandling or incorrectly fitting the leads. All returns will be examined by our factory before a replacement can be made.